1
00:00:00,000 --> 00:00:02,240
Lay a glob of sealant on a clean surface.

2
00:00:02,240 --> 00:00:06,010
Then mix it to make sure it is activated.

3
00:00:06,010 --> 00:00:07,210
Apply it to the rivet.

4
00:00:07,210 --> 00:00:09,060
But wait just a minute.

5
00:00:09,060 --> 00:00:13,140
You need to make sure you do not put it here or here.

6
00:00:13,140 --> 00:00:15,120
If it goes on either of these places,

7
00:00:15,120 --> 00:00:18,090
the stem may not break flush within requirements,

8
00:00:18,090 --> 00:00:20,240
meaning the rivet will have to be replaced.

9
00:00:20,240 --> 00:00:21,220
Instead,

10
00:00:21,220 --> 00:00:24,230
put the sealant around the rivet sleeve, here.

11
00:00:24,230 --> 00:00:26,090
Once that is finished,

12
00:00:26,090 --> 00:00:28,020
insert the rivet into the hole

13
00:00:28,020 --> 00:00:30,050
and fasten it with the riveter.

14
00:00:30,050 --> 00:00:33,240
Here is what your final result should look like.