1
00:00:00,000 --> 00:00:01,260
To remove a CherryMAX® rivet,

2
00:00:01,260 --> 00:00:02,170
you will need

3
00:00:02,170 --> 00:00:03,120
a pin punch,

4
00:00:03,120 --> 00:00:04,100
a center punch,

5
00:00:04,100 --> 00:00:05,090
center drills

6
00:00:05,090 --> 00:00:06,220
and a hole gage.

7
00:00:06,220 --> 00:00:08,240
Start by center punching the stem.

8
00:00:08,240 --> 00:00:11,000
Then use the dimple you made with the center punch

9
00:00:11,000 --> 00:00:13,170
as a guide for the small center drill.

10
00:00:13,170 --> 00:00:15,130
Switch over to the larger center drill

11
00:00:15,130 --> 00:00:17,100
and drill through the same area.

12
00:00:17,100 --> 00:00:19,100
This destroys the lock.

13
00:00:19,100 --> 00:00:22,000
Drive out the rivet stem with the pin punch.

14
00:00:22,000 --> 00:00:23,230
Then drill through the head of the rivet,

15
00:00:23,230 --> 00:00:25,210
but not all the way through.

16
00:00:25,210 --> 00:00:27,190
Remove the rivet head with the pin punch,

17
00:00:27,190 --> 00:00:31,260
and use that same pin punch to get rid of the rest of the rivet shank.

18
00:00:31,260 --> 00:00:34,070
Then check the hole with the hole gage.

19
00:00:34,070 --> 00:00:35,140
If the red side fits,

20
00:00:35,140 --> 00:00:37,210
an oversize rivet may be required.

21
00:00:37,210 --> 00:00:39,000
If the green side fits,

22
00:00:39,000 --> 00:00:40,270
the same size rivet can be used.