Bleeding a CherryLOCK® riveter is best done while wearing safety glasses.
To get started,
fill the Air Bleeder with Dexron III automatic transmission fluid
up to, but not over, the fill line.
Remove the right side screw on the head assembly
and attach the air bleeder,
turning it upside down.
Plug in the air line.
Press and hold the trigger
for about two or three seconds, and release.
Keep doing this until there are no more air bubbles.
When finished,
turn the air bleeder down and take it off the riveter.
Put the screw back on the head assembly
and bleeding procedure is now complete.